top of page

Tool Sharpening Service in Crawfordsville Indiana

wabashvalley

Tool Sharpening Service
Professional Tool Sharpening Service

Carbide Tipped Circular Saw Blades

   Here at Wabash Valley Tool Sharpening have your carbide saw blades professionally sharpened and sent back to you. We sharpen 71/4" to 30" diameter carbide blades.

We sharpen all woodworking carbide tipped circular saw blades. Blades are precision sharpened and in most cases are sharper after we sharpen them then they were brand new. We sharpen circular saw blades up to 30" in diameter. We do not repair or replace carbide teeth on circular saw blades. If you don't say we will go ahead and sharpen carbide circular saw blades with up to 3% of the teeth missing. We remove as little carbide as possible so that you get the maximum number of sharpening's out of any of your saw blades. After sharpening we check each blade for plate run out and tooth runout making sure both are no more then .005. You will always get back your own saw blades and not somebody else's. 

   We do not replace carbide tips. If you have a blade that has more than 3% broken teeth, we will not sharpen that blade.

​Carbide Tipped Saw Blades, Biscuit Cutters, Milling Cutters, Scoring BladesWe Sharpen Up To 30" Diameter Saw Blades

​         ATB / FLAT             ATBR / TC       $.25 per tooth          $.35 per tooth

        7 1/4" Contractor Blades    $6.75 

Carbide Dado Blades

   Have your stacked dado sets professionally sharpened and sent back to you. We sharpen most all styles of dado blades. We need to receive both outer blades and all the chippers to the set you are sending, as they all need to be sharpened at the same time to properly sharpen them and keep them as a matched set.

Dado Blades and Chippers   - $.35 per tooth on outer blades and $3.50 per chipper

Planer and Jointer Blades

   We specialize in precision sharpening of carbide and HSS planer and jointer blades. We flat grind these blades. Our primary goal is to provide our customers with the highest quality sharpening service possible, while also offering an unbeatable level of customer service. 

   Our experienced technicians use state-of-the-art equipment to bring your tools back to their original sharpness, while also helping to extend the life of your tools. We take pride in our commitment to providing the highest quality sharpening service available. We can easily sharpen planer blades up to 30" in length.

 

HSS Prices on Planer and Jointer Blades

Single Edged HSS Jointer and Planer Blades - 1/8" Thick $.50 per inch* - 3/8" Thick $.75 per inch* - 1/2" Thick $1.00 per Inch*

Double Edged HSS Jointer and Planer Blades -1/8" Thick $1.00 per inch* - 3/8" Thick $1.50 per Inch* - 1/2" Thick $2.00 per Inch*

Match grinding 25% more. We cannot sharpen double edge planer blades that are under 1/8" thick.

 

Carbide Prices on Planer and Jointer Blades 

Single Edged Carbide Jointer and Planer Blades - 1/8" Thick $1.00 per inch* - 3/8" Thick $1.50 per Inch* - 1/2" Thick $2.00 per Inch*

Double Edged Carbide Jointer and Planer Blades - 1/8" Thick $2.00 per inch* - 3/8" Thick $3.00 per Inch* - 1/2" Thick $4.00 per Inch*

Match grinding 25% more. We cannot sharpen double edge planer blades that are under 1/8" thick.

Hand Plane Blades

We sharpen hand planes blade bevels at 25 degrees. If you prefer a different angle just let us know what angle you want your hand plane blades sharpened at. $5.00 each

Wood Chisels
   We can sharpen your chisels correcting the primary angle on your chisel with a primary angle of your choice 20, 25, and 30 degrees. Your chisels will come back sharp with a straight / square edge. Just let us know what angles you want your wood chisels sharpened at. - $4.00 each

Wabash Valley Tool Sharpening

3297 E 350 N

Marshall Indiana 47859

888-618-6776

0 views0 comments

Recent Posts

See All

Comments


Wabash Valley Tool Sharpening
3297 E 350 N
Marshall Indiana 47859

Business Hours:

Monday - Friday 8:00 - 4:00 EST
Saturday - 8:00-12:00
 
Customer Service: 888-618-6776
Email: sharpening@wabashvalleyenterprises.com
Why Buy New When You Can Get It Sharpened as Sharp As New For Less!

 

©2025 Wabash Valley Tool Sharpening A Wabash Valley Enterprises Company

bottom of page